Technical Center Material Forming

  • Furnaces and heating systems

    Various temperature controlled muffle furnaces with Tmax up to 1100°C

    Coil furnace Furnace
    chamber:
    Tmax(techn):

    electrical temperature control (6-piece linear)
    Power: 18kW
    500x1000x500mm
    1400°C (dry)
    1150°C (humid)

    Conductive system

    Specimen dimensions:
    Sheet:

    Round:
    Shower device:
    Protective gas operation:
    Tmax:
    Control:


    10x30cm (max.20x30cm)
    1-10mm thick
    30cm long, (5-10mm)
    yes
    yes
    1200°C
    controller programmable with up to 16 ramp temperature segments
    temperature rise>1000K/s

    software allows programming of multiple ramp-target-temperature-hold cycles

    power: 50kW (50A)

  • Deep drawing and extrusion, wire and tube drawing equipment

    Electro-hydraulic deep drawing press

    4-column design
    Total pressing force:
    Sheet holding force:
    Table size:
    2500kN
    0-800kN
    1000x1000mm

    Stepless speed regulation Facilities for extrusion tests up to 3m outlet length

    Drawing bench

    Wire diameter:
    Drawing length:
    Drive:    		9-0,5mm
    5200mm
    3kW

    3-stage gearbox, hand shiftable

    Single drawing block

    Wire diameter:
    Drawing speed:    		12-1,5mm
    0-5m/s

    Double drawing block

    Drawing speed:
    Wire diameter:    		0-8m/s
    5.5-0.8mm

  • 20 Roll Film Rolling Mill

    20 rolls foil rolling mill

    Roll diameter:
        Work rolls
        Back-up rolls
    Roll width:
    Rolling force:
    Rolling speed:
    Strip thickness:
    Strip width:
    Reel discs:

    Drive: 2x4,3kW & 1x19kW


    10,5/15mm
    100mm
    140mm
    100kN
    0-60m/min
    1-0,005mm
    25-110mm
    200mm

  • Rolling equipment

    Duo/Quarto Cold Rolling Mill 6"

    Roll diameter:
        Duo
        Quarto
    Rolling force:
    Rolling speed:
    Coil trains:
    Strip thickness:
    Strip width:
    Rolling oil and emulsion
    operation Drive: 2x30kW+2x40kW


    up to 150mm
    up to 50mm
    400kN
    0-1.25/2.5 m/s
    1.5-30kN
    3.0-0.8mm
    max. 150mm

    Duo-hot/cold rolling mill 8"

    Roll diameter:
    Roll width:
    Roll speed:
    Coil trains:
    Strip thickness:
    Strip width:
    Drive: 2x 19.7kW    		180mm
    300mm
    13.7/26.4 m/min
    200mm
    5.5-1.0mm

    Duo-Roller 10"

    Roll diameter:
    Roll width:
    Roll force:
    Roll speed:
    Roller speed:

    Roll width:
    Drive: 2x 80kW

    250-290mm
    350mm
    1800kN
    0.05-0.73 m/s
    min. 4.0 min-1
    max. 48.3 min-1
    300mm